Laser marking technology is one of the largest application areas of laser processing. Laser marking is a marking method that uses high-energy-density laser to locally irradiate the workpiece to vaporize the surface material or cause a chemical reaction of color change, thereby leaving a permanent mark. Laser marking can produce various texts, symbols and patterns, and the character size can range from millimeters to microns, which is of special significance to the anti-counterfeiting of products.
The focused ultra-fine laser beam is like a tool, which can remove the surface material of the object point by point. Its advancement is that the marking process is non-contact processing, which does not produce mechanical extrusion or mechanical stress, so it will not damage the processed object; because The size after focusing of the laser is very small, the heat-affected area is small, and the processing is fine. Therefore, some processes that cannot be achieved by conventional methods can be completed.
Features of Fiber Laser Marking Machines
» Equipped with IPG, SPI, Raycus laser source with 100,000 hours working time on average.With reflection and isolation pro[1]tection function and high peak power.
» Compact design, suitable for continuous assembly line work. High working frequency, thus increasing the marking speed effectively.
» PC controlled, friendly interface and easy operation. Adopt general software to input pattern documents, easy input and powerful.
» Single mode output. Superior beam quality.
Technical Parameters:
Model | TH-FLMS20 | TH-FLMS30 | TH-FLMS50 | TH-FLMS100 | TH-FLMS200 | TH-FLMSMP20 | TH-FLMSMP30 | TH-FLMSMP60 |
Wavelength | 1064nm | |||||||
Laser source | Fiber laser | MOPA laser | ||||||
Laser power | 20W | 30W | 50W | 100W | 200W | 20W | 30W | 50W |
Cooling way | Air cooling | |||||||
Marking range | 100x100mm optional | |||||||
Repetition accuracy | ±0.003mm | |||||||
Min. Line width | 0.045mm | |||||||
Single point energy | 1.5mj | |||||||
Beam quality | ≤1.2 | ≤1.3 | ≤1.5 | |||||
Pulse width | 100ns | 2-350ns | ||||||
Pulse repetition frequency | 20-200kHz | 1-4000kHz | ||||||
Engraving speed | ≤7000mm/s | |||||||
Protection class | IP54 |
Laser marking technology is one of the largest application areas of laser processing. Laser marking is a marking method that uses high-energy-density laser to locally irradiate the workpiece to vaporize the surface material or cause a chemical reaction of color change, thereby leaving a permanent mark. Laser marking can produce various texts, symbols and patterns, and the character size can range from millimeters to microns, which is of special significance to the anti-counterfeiting of products.
The focused ultra-fine laser beam is like a tool, which can remove the surface material of the object point by point. Its advancement is that the marking process is non-contact processing, which does not produce mechanical extrusion or mechanical stress, so it will not damage the processed object; because The size after focusing of the laser is very small, the heat-affected area is small, and the processing is fine. Therefore, some processes that cannot be achieved by conventional methods can be completed.
Features of Fiber Laser Marking Machines
» Equipped with IPG, SPI, Raycus laser source with 100,000 hours working time on average.With reflection and isolation pro[1]tection function and high peak power.
» Compact design, suitable for continuous assembly line work. High working frequency, thus increasing the marking speed effectively.
» PC controlled, friendly interface and easy operation. Adopt general software to input pattern documents, easy input and powerful.
» Single mode output. Superior beam quality.
Technical Parameters:
Model | TH-FLMS20 | TH-FLMS30 | TH-FLMS50 | TH-FLMS100 | TH-FLMS200 | TH-FLMSMP20 | TH-FLMSMP30 | TH-FLMSMP60 |
Wavelength | 1064nm | |||||||
Laser source | Fiber laser | MOPA laser | ||||||
Laser power | 20W | 30W | 50W | 100W | 200W | 20W | 30W | 50W |
Cooling way | Air cooling | |||||||
Marking range | 100x100mm optional | |||||||
Repetition accuracy | ±0.003mm | |||||||
Min. Line width | 0.045mm | |||||||
Single point energy | 1.5mj | |||||||
Beam quality | ≤1.2 | ≤1.3 | ≤1.5 | |||||
Pulse width | 100ns | 2-350ns | ||||||
Pulse repetition frequency | 20-200kHz | 1-4000kHz | ||||||
Engraving speed | ≤7000mm/s | |||||||
Protection class | IP54 |